EMI3News & insightProduct
CNC Lathe Receives an Upgrade
A local Tasmanian company has received great results recovering damaging ferrous particles from their CNC Lathe Cooling fluid.
A Clear 10 Magnom Unit was installed inline between the cooling fluid pump and tooling for just two weeks.
There was an incredible recovery of very fine particles captured on the cleanable, non-consumable magnetic Magnom core.
The benefits of recovering this contamination include:
- Increased tooling life
- Increased coolant life
- Reduction of further damage to the rotating seals
Contact us for more information about the Magnom Filtration System.
Clear 10 Magnom Filter
Was this useful?
We read every response. It decides what we write next.
We will not add you to a mailing list.
Keep reading
Product
Inside the limits, and still going wrong
A condition monitoring question captures a number and a photograph. The platform trends it across the fleet, watches the rate of change, and raises an alert while the reading is still comfortably inside its limits.
4 September 2026 · 7 min read
Insight
Your CMMS is not the execution layer
Enterprise systems hold the asset record. Planning systems schedule the work. Neither of them sees the work being performed, and that gap is not a reporting problem to be fixed with another dashboard.
12 August 2026 · 8 min read
Insight
Chaos, constrained: why maintenance behaves like a complex system
Small deviations at the start of a shift produce very large differences by the end of it. You cannot remove that sensitivity, but you can bound it, the way aviation and surgical systems do.
29 July 2026 · 6 min read